Festo CPX-FB33 Manual page 28

1. Installation
2
DIL switch
DIL 2.1:
DIL 2.2:
(factory setting)
DIL 2.1:
DIL 2.2:
DIL 2.1:
DIL 2.2:
DIL 2.1:
DIL 2.2:
1)
Diagnostics mode status bits occupy 1 byte of address space (8 I bits)
2)
Diagnostics mode I/O diagnostics interface occupies 4 bytes of address space (16 I and 16 O bits)
3)
From Revision 21
Tab. 1/2: Setting the diagnostics mode with DIL switch
1-10
In the remote I/O operating mode:
setting the diagnostics mode with DIL switch
The function of the DIL switch
the DIL switch
minal ( Tab. 1/1):
The diagnostics mode is set with DIL switch
I/O operating mode (
Set diagnostics mode:
(in the remote I/O operating mode)
OFF I/O diagnostics interface and status bits are switched off or
OFF diagnostics mode is set via the hardware configuration of the
configuration software
(+ 0 byte I / 0 byte O)
Status bits are switched on
OFF
ON (+ 1 Byte E / 0 Byte A)
ON I/O diagnostics interface is switched on
OFF (+ 2 bytes I / 2 bytes O)
ON Reserved for future extensions
ON
2
depends on the setting of
1
or the set operating mode of the CPX ter-
Tab. 1/2).
3)
1)
2)
2
Festo P.BE-CPX-PNIO-EN en 1407c English
2
2
in the remote