Festo CPX-FB33 Manual page 84

2. Commissioning
Activate "Fast Start-up"
1
2
3
Fig. 2/6: "Fast-Start-up" settings – adaptation of the I/O cycle time (update time)
2-36
Note
The "Fast Start-up" operating mode has restrictions re-
garding commissioning and parameterisation. Detailed
information can be found in the corresponding chapters.
Also observe the notes in section 2.8 and section B.1.3
regarding "Fast Start-up".
8. Place a check in front of "Prioritized Startup" 2 in the
window "Properties – CPX" (see Fig. 2/5).
9. Select the tab "IO Cycle" (1 in Fig. 2/6).
Festo P.BE-CPX-PNIO-EN en 1407c English