Technical Specifications Of Field Bus Node Cpx-Fb14 - Festo CPX-FB14 Electronic Manual

A. Technical appendix
A.1

Technical specifications of field bus node CPX-FB14

General
General technical specifications
Protection class as per EN 60529, CPX-FB14 fitted
completely, plug connector inserted or provided with
protective cap
Protection against electric shock
(protection against direct and indirect contact as per
EN 60204-1/IEC 204)
Module code (CPX-specific)
Power supply
Operating voltage / Load voltage
Current consumption of field bus node CPX-FB14
– From operating voltage supply for
electronics/sensors (V
SEN
Operating voltage for the bus interface
Sub-D plug: pin 3, pin 9
M12 adapter: pin 2, pin 3
Screw terminal adapter: pin 1, pin 5
– Rated value
– Tolerance
– Current consumption
Electrical isolation
en 0206NH
Festo P.BE-CPX-FB14-GB
)
Technical specifications for the pneumatics can be found in
the Pneumatics manual (see Tab. 0/1).
See CPX system manual:
– P.BE-CPX-SYS-...
IP65
By means of PELV power units
(Protected Extra-Low Voltage)
CD
h
See CPX system manual:
– P.BE-CPX-SYS-...
Max. 200 mA (only CPX-FB14)
24 V DC (protected against incorrect
polarity, external fuse required)
11...30 V
Max. 30 mA
Bus interface opto-decoupled
A-3