Network-Specific Technical Data Bus Node Cpx-Fb33, Cpx-M-Fb34 And Cpx-M-Fb35 - Festo CPX-FB33 Manual

A. Technical appendix
A.4 Network-specific technical data
bus node CPX-FB33, CPX-M-FB34 and CPX-M-FB35
Network-specific characteristics
Fieldbus protocol
Supported protocol characteristics and protocol
functions (selection)
Supported CPX characteristics and functions
(selection)
Specification
A-6
PROFINET IO RT/IRT (PNIO RT/IRT):
– based on Industrial Ethernet
– based on the Ethernet protocol (IEEE 802.3)
– real-time-capable
– supports LLDP
– LLDP
– Access via SNMP
– Fast Start-up (FSU)
– PROFIenergy
– PROFIsafe
– Shared device
– Media redundancy (MRP)
– CPX-terminal configuration through CPX-FMT
– Export/import of the CPX-terminal
configuration through CPX-FMT and control
system ("export function")
– CPX terminal diagnostics via the fieldbus and
control system
– Webserver function:
representation of the PROFINET topology, CPX
terminal configuration with diagnostic
information, PROFINET-I&M data, Ethernet
statistics
Selection of directives, standards and norms
regarding PROFINET:
– PROFINET installation guidelines
("PROFINET Installation Guide",
"Installation Guideline PROFINET Part 2...")
– IEC 61158
– IEC 61784
– IEC 61918
For additional information:
www.profinet.com
www.profibus.com/download/
Festo P.BE-CPX-PNIO-EN en 1407c English