Festo CPX-FB33 Manual page 59

2. Commissioning
Festo P.BE-CPX-PNIO-EN en 1407c English
Pneumatic modules of type MPA-P or MPAF-P and VPPM
are among the analogue modules. Observe the sequence
of the modules in addressing or I/O mapping (see
Tab. 2/9).
Additional information on the pneumatics can be found in the
corresponding pneumatics descriptions
view "Descriptions of the CPX terminal" in the CPX system
description (P.BE-CPX-SYS...).
The descriptions for the pneumatic valve terminal (Midi/Maxi,
CPA, MPA and VTSA/VTSA-F or ISO) contain the address as-
signment within the pneumatic modules.
Information about pneumatic interfaces and pneumatic mod-
ules can be found in the descriptions of the input/output
modules P.BE-CPX-EA-... and P.BE-CPX-AX-...
Document over-
2-11