Technical Appendix; Technical Specifications Of Field Bus Node Type Cpx−Fb11 - Festo CPX-FB11 Manual

A. Technical appendix
A.1 Technical specifications of field bus node type CPX−FB11
General specifications
General technical specifications
Protection class as per EN 60529,
CPX−FB11 fitted completely, plug connector inserted
or provided with protective cap as specified in the
section Accessories".
Protection against electric shock
(protection against direct and indirect contact as per
EN 60204−1/IEC 204)
Current consumption of field bus node CPX−FB11
Internal current consumption at 24 V
(internal electronics):
From operating voltage supply for electronics/
sensors (V )
EL/SEN
Electrical isolation
DeviceNet interface
Module code (CPX−specific)
Module identifier (handheld)
Field bus
Protocol
Baud rate
Cable type
Cable length
(depends on baud rate and cable type)
Festo P.BE−CPX−FB11−EN en 0306a
See CPX system manual
P.BE−CPX−SYS−...
IP65
By means of PELV power units
(Protected Extra−Low Voltage)
Typ. 65 mA
Electrically isolated (optocoupler)
Remote I/O:
Remote controller:
Remote I/O:
FB11−RIO DeviceNet Remote I/O
Remote controller:
FB11−RC DeviceNet bus node
DeviceNet according to ODVA specification V 2.0
125 kBaud, 250 kBaud, 500 kBaud
See DeviceNet specification part 1, Appendix B and
installation guidelines for your controller
Max. 500 m
204
155
A−3