Festo CPX-FB33 Manual page 151

B. Glossary
Activation/shift
Festo P.BE-CPX-PNIO-EN en 1407c English
Shift of the operating mode to "Fast Start-up" is performed
in the control software, e.g. Siemens STEP 7: Observe the
following note.
Note
Activation of the additional function "Fast Start-up" (FSU).
Observe that the shift to "Fast Start-up" in the control soft-
ware must be made at two configuration levels:
– Basic hardware configuration
CPX terminal characteristics
Prioritized Start-up (FSU)"
– CPX terminal configuration
Allocate configuration table
station symbol" and "Select bus node" – with additional
function FSU.
Further information about the additional function FSU can
be obtained in the Internet
the "PROFINET System Description".
Section 2.6.4, "Set up
Section 2.7.1, "Open
www.profinet.com, e.g. in
B-7