2. Commissioning
2.5.4 Parameterisation via the Festo Maintenance Tool (method 1)
2.5.5 Parameterisation with the handheld unit (method 2)
Festo P.BE−CPX−FB38−EN en 0804NH
With the PC software Festo Maintenance Tool (CPX−FMT),
you can easily parameterise the CPX terminal over a USB
connection.
You receive the necessary USB adapter with the CPX−FMT
software.
The Festo handheld unit (CPX−MMI) offers menu−guided
access for parameterisation without configuration software.
Information about general operation of the handheld unit can
be found in the related manual (P.BE−CPX−MMI−1−...).
Please note
The last parameterisation set or received in the
CPX terminal is always valid.
2−45