Maintenance And Conversion - Festo MPA-F Series Manual

5. Maintenance and conversion

Contents of this chapter
Additional information
Festo P.BE−MPAF−EN en 0910a
This chapter explains how to dismount and mount the
following components for maintenance work and conversion:
The dismounting and mounting of electronics modules,
valves, cover plates and pressure regulator plates at valve
positions.
The dismounting and mounting of exhaust plates or flat
plate silencers on the pneumatic air supply plate,
pneumatic interface or multi−pin plug connection plate.
The dismounting and mounting of the manifold blocks,
pneumatic supply plates and the right−hand end plate.
The following activities are also described:
Adding pressure zones
MPA−F valve terminal with CPX terminals:
Information on mounting /dismounting components and on
the electrical connections can be found in the CPX system
description.
MPA−F valve terminal with multi−pin plug connection:
Instructions on connecting the electric components can be
found in the package insert.
5−3