Identification & Maintenance - Festo CPX Series Manual

2. Commissioning
2.9 Identification & Maintenance
2−64
The Identification and Maintenance" (I&M) function serves
as an electronic nameplate of the bus node and offers
uniform, non−proprietary access to device−specific online
information via the internet.
Note
To use the I&M function, at least revision status 14
(Rev 14") is required (see name plate of the bus node).
If a bus node with an earlier version is used, the following
error message is displayed.
Fig. 2/23: I&M error message for bus nodes with revision
status (CPX revisions code) earlier than Rev 14"
Festo P.BE−CPX−PN IO−EN en 1008b