Technical Data For Connecting Cables - Kollmorgen SERVOSTAR 300 Instruction Manual

Kollmorgen
8.3.2

Technical data for connecting cables

Further information on the chemical, mechanical and electrical characteristics of the
cables can be obtained from our customer service.
Observe the rules in the section "Conductor cross-sections" on page 28. To reach the
max. permitted cable length, you must use cable material that matches the capacitance
requirements listed below.
Capacitance (phase to shield)
Motor cable
Resolver/Encoder cable less than 120 pF/m
Example: Motor cable
Shield
Technical data
For a detailed description of cable types and how to assemble them, please refer to the
accessories manual.
Chokes
Motor cables longer than 25m require the use of a motor choke 3YL or 3YLN.
S300 Instructions Manual
less than 150 pF/m
Core
Isolation
Core Isolation
Fill material
02/2017
U
V
W
PE
Capazity Phase-to-Shield
Electrical installation
M
3~
53