Important Screen Elements - Kollmorgen SERVOSTAR 300 Instruction Manual

Kollmorgen
If communication works, you see the start screen. Select "Setup Wizard" in the navigation
frame.
Make sure, that the amplifier is disabled (Input Enable connector X3 pin 12 must be 0 V
or open)!
9.3.3

Important Screen Elements

Help Function
The
with.
Key F1
Menu bar Help
Tool Bar
Status Bar
The status bar shows a green Online symbol, indicating that the communication works.
S300 Instructions Manual
online help gives detailed information to all parameters the servo amplifier can work
Starts online help
Starts online help
Context Help. Click the help symbol first. Then click the function for
which you need help.
Save to EEPROM, required if you changed parameters.
Reset, required if you changed configuration parameters.
02/2017
for the actual screen page.
with the first page.
Operation Mode, use "0: Digital Velocity" mode for
drive testing.
Setup
103