Symboles Used; Standards Used - Kollmorgen SERVOSTAR 300 Instruction Manual

General
1.3

Symboles used

1.4

Standards used

Standard
ISO 4762
ISO 12100
ISO 13849
IEC 60085
IEC 60204
IEC 60364
IEC 60439
IEC 60529
IEC 60664
IEC 60721
IEC 61000
IEC 61131
IEC 61491
IEC 61508
IEC 61800
IEC 62061
ISO 82079
UL 840
UL 508C
IEC
8
Symbol Indication
Indicates a hazardous situation which, if not avoided, will result in death
DANGER
or serious injury.
Indicates a hazardous situation which, if not avoided, could result in
WARNING
death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in
CAUTION
minor or moderate injury.
This is not a safety symbol. Indicates situations which, if not avoided,
could result in property damage.
This is not a safety symbol.
This symbol indicates important notes.
Warning of a danger (general). The type of danger is specified by the
warning text next to it.
Warning of danger from electricity and its effects.
Warning of danger from hot surfaces.
Warning of danger from suspended loads.
Warning of danger from automatic start.
Content
Hexagon socket head cap screws
Safety of machinery: Basic concepts, general principles for design
Safety of machinery: Safety-related parts of control systems
Electrical insulation - Thermal evaluation and designation Maintenance
Safety of Machinery: Electrical equipment of machinery
Low-voltage electrical installations
Low-Voltage Switchgear and Controlgear Assemblies
Protection categories by housing (IP Code)
Insulation coordination for equipment within low-voltage systems
Classification of environmental conditions
Electromagnetic compatibility (EMC)
Programmable controllers
Electrical equipment of industrial machines – Serial data link for real-time commu-
nications between controls and drives.
Functional safety of electrical/electronic/programmable electronic
safety-related systems
Adjustable speed electrical power drive systems
Functional safety of electrical/electronic/programmable electronic
safety-related systems
Preparation of instructions for use - Structuring, content and presentation
UL Standard for Safety for Insulation Coordination Including Clearances and
Creepage Distances for Electrical Equipment
UL Standard for Safety Power Conversion Equipment
International Electrotechnical Commission
02/2017
UL
Kollmorgen
Underwriters Laboratories
S300 Instructions Manual