Keypad Operation; Status Display; Standard Menu - Kollmorgen SERVOSTAR 300 Instruction Manual

Setup
9.5.1

Keypad operation

The two keys can be used to perform the following functions:
Key symbol Functions
9.5.2

Status display

9.5.3

Standard menu

110
press once : move up one menu item, increase number by one
press twice in rapid succession : increase number by ten
press once : decrease number by one
press twice in rapid succession : decrease number by ten
hold right key pressed, and then press left key as well :
to enter a number, "Return" function
State
to
Switch on
24V
status 1 : 24V switched on
status 2 : 24V switched on
status 3 : 24V switched on, mains supply switched on
status 4 : 24V and mains supply on, unit enabled
Parameters
02/2017
ð p.109
Station adress
the entry will be stored automatically,
when you exit the input field.
Data are being read from EnDat
unit indicates software version
after 1 sec. shift to status 2, 3 or 4
unit indicates current (here 6A)
flashing dot
unit indicates current and mains supply on
flashing dot
unit indicates current, mains supply on and enable
flashing dot
1 s 1 s
fault/warning signal : each error/warning
Kollmorgen
1 s
that has occurred will be indicated
successively for 4 blinks each
S300 Instructions Manual
1 s