Safety; You Should Pay Attention To This - Kollmorgen SERVOSTAR 300 Instruction Manual

Safety

2 Safety
This section helps you to recognize and avoid dangers to people and objects.
2.1

You should pay attention to this

Read the documentation!
Read the available documentation before installation and commissioning. Improper han-
dling of the servo amplifiers can cause harm to people or damage to property. The opera-
tor must therefore ensure that all persons entrusted to work on the S300 have read and
understood the manual and that the safety notices in this manual are observed.
Perform a risk assessment!
The manufacturer of the machine must generate a risk assessment for the machine, and
take appropriate measures to ensure that unforeseen movements cannot cause injury or
damage to any person or property. Additional requirements on specialist staff may also
result from the risk assessment.
Specialist staff required!
Only properly qualified personnel are permitted to perform such tasks as transport,
assembly, setup and maintenance. Qualified specialist staff are persons who are familiar
with the transport, installation, assembly, commissioning and operation of drives and who
bring their relevant minimum qualifications to bear on their duties:
Transport :
Unpacking:
Installation :
Setup :
The qualified personnel must know and observe IEC 60364 / IEC 60664 and national
accident prevention regulations.
Check the Hardware Revision!
Check the Hardware Revision Number of the product (see product label). This revision
number must match the Hardware Revision Number on the cover page of the manual. If
the numbers do not match up, visit the Tech-WIKI (http://www.wiki-kollmorgen.eu). The
'Download" section contains the various manual versions based on the hardware version
number.
Pay attention to the technical data!
Adhere to the technical data and the specifications on connection conditions (rating plate
and documentation). If permissible voltage values or current values are exceeded, the
servo amplifiers can be damaged. Unsuitable motor or wrong wiring will damage the sys-
tem components. Check the combination of drive and motor. Compare the rated voltage
and current of the units.
Observe electrostatically sensitive components!
The servo amplifiers contain electrostatically sensitive components which may be dam-
aged by incorrect handling. Discharge your body before touching the servo amplifier.
Avoid contact with highly insulating materials (artificial fabrics, plastic film etc.). Place the
servo amplifier on a conductive surface.
10
02/2017
only by personnel with knowledge of handling electrostatically
sensitive components.
only by electrically qualified personnel.
only by electrically qualified personnel.
only by qualified personnel with extensive knowledge of electrical
engineering and drive technology
Kollmorgen
S300 Instructions Manual