Expansions Cards; Guide To Installation Of Expansion Cards - Kollmorgen SERVOSTAR 300 Instruction Manual

Kollmorgen
10

Expansions Cards

You can find information about availability and order numbers on page 135.
Expansions cards can only be built into amplifiers without option -FN or -EC!
10.1

Guide to installation of expansion cards

Before you start working, safely disconnect the device from any voltage, that means nei-
ther the electrical power supply nor the 24 V auxiliary voltage of the servo amplifier nor
the supply voltages of any other connected equipment is switched on.
l
l
l
l
l
l
S300 Instructions Manual
Use a suitable screwdriver to lever off the cover of the option slot.
Take care that no small items (such as screws) fall into the open option slot.
Lever off the small metall sheet and push it back to the small slot. Dispose the big
metall sheet.
Push the expansion card carefully into the provided guide rails of the main slot, with-
out twisting it.
Press the expansion card firmly into the slot.
Screw the screws on the front cover into the threads in the fixing lugs. This ensures
that the connectors make good contact.
02/2017
Expansions Cards
115