Table of Contents
Advertisement
Installing the Server into the
System Rack
This section describes how to install your rack-mount server unit into a standard EIA 19-inch rack
cabinet.
Pull the two extension rail assemblies out of each rack mounting assembly on the rack
1.
cabinet until they lock in place.
With at least two persons assisting you, lift and slide the server into the extended rail slide
2.
assemblies.
Your system can weigh up to 44 kg. To avoid personal injury, make sure you
h
ave two people help you lift or move the system.
Ensure that the location of the rack-mount server unit does not create an
u
nstable condition when installed in the rack cabinet.
Slide rail
It is strongly recommended that three people are present when lifting and
assembling the rack-mount server unit into a rack cabinet.
WARNING
WARNING
WARNING
Setting Up Your System 2-27
Advertisement
Table of Contents
