Table of Contents
Advertisement
2-28 Setting Up Your System
Align the server center slide rails with the extended rail assemblies.
!
Carefully slide the server into the extended rail assemblies until it stops.
!
Carefully press in on the safety latches on the center slide bars, ensure that the safety
!
latches on the extension rail assemblies are centered and slide the server towards the rear of
the rack cabinet.
When you first slide the server into the rack cabinet, extra pressure
NOTE:
may have to be applied. After the first time, the slides will move easier.
Check that the server slides in and out of the rack cabinet.
3.
Safety latch
Advertisement
Table of Contents
