Loosen the two screws securing the CD-ROM adapter and remove it.
5.
If you removed an optional 5.25-inch device in Step 2, remove the slide rails attached to
6.
this optional device. Save the screws for future use.
Removing the EMI Cover
If EMI cover(s) are attached to the 5.25-inch device bay of the chassis, follow the instructions
below to remove the cover(s).
Remove the two screws that attach the EMI covers to the chassis and save them for future
1.
use.
Remove all of the EMI covers. Do not remove any of the hard disk drive carriers.
2.
Screw
CD-ROM adapter
EMI cover
Setting Up Your System 2-13
Screw