Table of Contents
Advertisement
Installing the Handle
Follow the procedure below to install the handle.
Position the handle so that the screw holes of the handle align with the screw holes located
1.
the nearest to the front of the chassis.
Fix the handle with two screws (C).
2.
Repeat steps 1 and 2 for the other handle.
3.
Remove all the washers from all the captive screws.
4.
Insert the captive screw into the handle and put the washer removed in the previous step to
5.
attach the screw to the handle.
Repeat steps 4 and 5 for the other screws.
6.
Screw holes located the
nearest to the front of the
chassis
Setting Up Your System 2-23
Handle
Washer
Advertisement
Table of Contents
