Table of Contents
Advertisement
7-16 Upgrading your Server
Hard Disk Drive Cage
The Hard Disk Drive cage can be equipped with five hard disks of the built-in type.
HDD cage
SCSI cable
With the installation of an additional HDD cage, the server can contain up to 10 hard disks. You
can access hard disks only from the front of the server.
The SCSI IDs of the hard disks installed in the HDD cage are assigned from ID8 to ID12 (see figure
below).
In addition, connecting the interface cable of the HDD cage to the disk array controller enables the
installed hard disks to operate in a disk array configuration.
HSBP cable
ID3
ID4
ID12
ID11
ID10
Screws
(6-mm long,
(long)
5 pcs.)
ID2
ID1
ID0
ID9
ID8
Screws
(8-mm long,
4 pcs.)
Advertisement
Table of Contents
