Table of Contents
Advertisement
MWA
MWA is an application that enables the remote management of the server through a management
PC over the network. (A management PC is a computer running ESMPRO Manager.) This
application assists in reducing responsibility of the administrator for managing the operation of the
server.
A management PC running MWA must be connected to the server via LAN, WAN, or direct
connection for the remote management through MWA.
See the online document "MWA First Step Guide" in the
NOTE:
EXPRESSBUILDER CD-ROM for details on MWA setup and how to use
it.
cd-rom-drive:\mwa\doc\en\mwa_fsg.pdf
See MWA Online Help for details on the functions and how to operate
them.
IMPORTANT:
The COM B port or LAN 1 port is used for communication between the
!
Base Management Controller (BMC) in the server and the management
PC. See Chapter 1 for connector location.
To establish communication between the server and the management PC
!
via the COM B port, use the BIOS setup utility to switch the parameters
of "Console Redirection" in the "Server" menu to the same settings as
the parameters on MWA. For details of MWA, refer to online
documentation "MWA First Step Guide" stored in the
EXPRESSBUILDER CD-ROM.
Installing the Operating System and Utilities 4-53
Advertisement
Table of Contents
