Table of Contents
Advertisement
4-52 Installing the Operating System and Utilities
– Copy phase: Setup copies all the appropriate software files to the destination directory.
A progress gauge displays the files being loaded and the percentage of completed
installation.
NOTE
When installing ESMPRO Manager in an already existing
:
directory, ESMPRO Manager will not operate unless the access right
required for ESMPRO Manager operation has been set.
When installing ESMPRO Manager in a non-existing directory, the
installer sets the following access rights.
Administrators
Everyone
NvAdmin *
SYSTEM
* ESMPRO User Group specified at installation.
When the installation is complete, restart the system.
5.
Adding/Deleting the Web Component
To add or delete the Web Component, set up the ESMPRO Manager again by following the
instructions provided in the subsection "Installing the Manager Software".
To add the Web Component, check [Web Component] in the dialog box and then click on [Next].
To delete the Web Component, clear the check of the [Web Component] and then click on [Next].
You cannot go to the next step with all checks cleared.
NOTE:
Using the ESMPRO Manager
For details on using the ESMPRO Manager and other explanations on ESMPRO, refer to the online
document in the EXPRESSBUILDER CD-ROM.
Full Control(All)(All)
Read(RX)(RX)
Full Control(All)(All)
Full Control(All)(All)
Advertisement
Table of Contents
