Table of Contents
Advertisement
Advanced
Move the cursor onto "Advanced" to display the Advanced menu. Each menu item preceded by "
mark has its submenus. Select an option with the "
See the table below for setup options on the screen.
Option
Parameter
Boot-time
[Disabled]
Diagnostic Screen
Enabled
Reset
[No]
Configuration Data
Yes
NumLock
On
[Off]
Memory/Processor
[Boot]
Error
Halt
IMPORTANT
If Reset Configuration Data is set to "Yes", boot device priority is also
!
cleared. Take a note of boot device priority before changing the
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.
Description
Specify whether normal POST messages are
displayed or not during boot.
If this option is set to "Disabled", the OEM
logo is displayed instead of POST messages
(press ESC to display the POST messages).
Select "Yes" to clear the configuration data
(system information stored by POST). The
parameter "No" will be resumed when the
server restarts.
Enable or disable the Numlock function at
system start-up.
The boot up operation pauses at the end of
POST if a memory error or a CPU error
occurs.
:
Configuring Your System 3-13
" mark and press Enter to display its submenu.
8
Your Setting
[ ]: Factory-set
"
8
Advertisement
Table of Contents
