Table of Contents
Advertisement
Locate the slot in which you are going to install a hard disk drive.
3.
The server has five slots. Install hard disk drives in ascending order of the SCSI ID
numbers. The SCSI IDs assigned to the slots are all determined: SCSI ID0 to SCSI ID4
from right to left.
Remove the dummy tray or empty disk carrier.
4.
IMPORTANT:
Dummy tray
If not already done, install the hard disk drive in the disk carrier and fix it using the four
5.
screws present on the disk carrier.
Pull the hard disk drive handle.
6.
Firmly hold the additional hard disk drive (with the tray provided) and handle, and insert it
7.
into the slot.
Handle the dummy tray carefully.
Upgrading your Server 7-11
Advertisement
Table of Contents
