Table of Contents
Advertisement
4-30 Installing the Operating System and Utilities
If the [Properties] dialog box appears, provide the following setting:
8.
<[ID] page>
Connection Type: COM
COM:
Select the [Open Remote Console] command from the popup menu displayed by
9.
right-clicking on the server name to start the [MWA Remote Console]. Then click on the
[Connect] button.
Connect the management PC to serial port B (COM B) on the main unit directly.
10.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive of the main unit. Insert
11.
the floppy disk storing the setting information (CSL_LESS.cfg) into the floppy disk drive.
Turn off the power of the main unit and then on again to restart the system.
12.
After a single reboot, the main menu appears on the screen of the management PC to allow
the hardware setup and several utilities to be run from the management PC.
The main menu appears without rebooting when setup information
NOTE:
(CSL_LESS.CFG) inside the floppy disk is already established.
Main Menu
Shown below are the Main menu items.
Setup
!
Automatically sets up the server.
Tools
!
Launches the features of EXPRESSBUILDER individually.
Help
!
Help messages on EXPRESSBUILDER.
Quit
!
Quits EXPRESSBUILDER.
Direct (Cross cable)
Advertisement
Table of Contents
