Installing Microsoft Windows ® 2000 Operating System - NEC EXPRESS5800/120MF User Manual

Hide thumbs Also See for EXPRESS5800/120MF:
Table of Contents

Advertisement

C-4 Installing Windows 2000
Installing Microsoft Windows
Use the following procedure to set up and perform a clean Windows 2000 Operating System
installation on your server.
Insert the Windows 2000 CD into the CD-ROM drive and boot your system by pressing
1.
CTRL+ALT+Delete.
IMPORTANT
is installed in your server; go to Step 7 if your server does not
include a RAID controller.
While the message "Setup is inspecting your computer's hardware configuration" or a
2.
solid blue background is displayed on the screen, press the F6 key.
IMPORTANT:
when the F6 key has been pressed
When the following message is displayed, press S.
3.
"Setup could not determine the type of one or more mass storage devices installed in your
system, or you have chosen to manually specify an adapter. Currently, Setup will load
support for the following mass storage devices."
When the following message is displayed, select "Other" and then press Enter.
4.
"Select the SCSI Adapter you want from the following list, or select "Other" if you have a
device support disk provided by an adapter manufacturer."
Insert the "Windows 2000 OEM-DISK" diskette into the floppy drive, and press Enter. A
5.
list of mass storage devices is displayed.
Select the RAID disk array controller installed in your server from the list of mass storage
6.
devices (LSI Logic MegaRAID 320-2).
Follow the messages on the screen to continue to install.
7.
IMPORTANT:
Installation Guide for more extensive installation procedures.
For LAN adapter driver installation, see Installing LAN
Adapter Drivers later in this appendix.
After installing Windows 2000, logon to the system using the administrator account or
8.
another account, which is a member of the Administrator's group.
Insert the EXPRESSBUILDER CD and run the "Windows 2000 Update Module" for the
9.
Express5800 120Mf Server.
®
2000 Operating System
Perform Steps 2 through 6 if a RAID controller
:
There is no visible indication on the screen
.
Please consult the Microsoft Windows 2000

Advertisement

Table of Contents
loading

Table of Contents