Removing the Stabilizers
Follow the procedure below to remove the stabilizers.
Place the chassis on a work table with its left side panel facing up so that its stabilizers
1.
protude from the table.
Remove the four screws that attach the rear stabilizer to the chassis and remove the
2.
stabilizer.
Remove the four screws that hold the front stabilizer to the chassis and remove the
3.
stabilizer.
Removing the Top Cover
Follow the procedure below to remove the top cover.
Remove the screw securing the top cover. Keep it for future use.
1.
Loosen the two thumbscrews that attach the top cover to the chassis.
2.
Slide the cover backward a short distance, until it stops.
3.
Pull the entire cover outward, straight away from the chassis, to disengage the rows of tabs
4.
from the notches in the top and bottom edges of the chassis. Set the cover aside.
Setting Up Your System 2-9