Table of Contents
Advertisement
3-2 Configuring Your System
SYSTEM BIOS ~ SETUP ~
The SETUP utility is provided to make basic hardware configuration for the server. This utility is
pre-installed in the non-volatile memory of the server and ready to run.
The server is configured with the correct parameters using the SETUP utility and shipped in the
best conditions. Thus, you don't need to use the SETUP utility in most cases. However, you might
wish to use the SETUP utility in the cases described below.
IMPORTANT:
The SETUP utility is intended for system administrator only.
!
The SETUP utility allows you to set a password. The server is provided
!
with two levels of password: Administrator and User. With the
Administrator password, you can view and change all system
parameters of the SETUP utility. With the User password, system
parameters available for viewing and changing are limited.
Do not set any password before installing the OS.
!
The server contains the latest version of the SETUP utility. Dialog
!
boxes appearing on your SETUP utility, thus, may differ from
descriptions in this user's guide. If you find anything unclear, see the
online help or ask your sales representative.
Advertisement
Table of Contents
