Table of Contents
Advertisement
If [Yes] → Go to step 8.
If [Skip] → Go to step 9.
[Using a Blank Disk]
1)
Click the box under [Setup File Name: (A)] or press A.
The input box appears.
2)
Input the file name. Click [Use].
[Operating System to Install] appears.
The OS supported by the computer are displayed in the list.
3)
Select [Windows 2000] from the list box.
Confirm the contents specified during OS installation.
8.
Under "Language Information" specify the language version of the operating system to be
installed and the keyboard to be used on the installed system.
If a Disk Array Controller Board is installed in the Express server, the [Configure RAID]
screen appears. Confirm the RAID configuration, modify if necessary, and then click
[Next].
Next, the [Basic Information] screen appears. Confirm the existing values, modify as
required, and then click [Next]. ("Supported Computer" shown in the screen differs
according to the model.)
Then, click [Next], [Back], or [Help] on the screen to continue. Modify the existing values
as required.
IMPORTANT:
Modify the partition size as required to install the operating system on a
!
partition larger than the minimum required size.
If you select "Use Existing Partition" at "System Partition", the data files
!
contained in the first partition (excluding recovery partition) will be
deleted and reformatted. The data files contained in other partitions will
be retained.
Example:
You cannot re-install the system and preserve an existing partition that
!
has been upgraded to a Dynamic Disk using Express Setup.
If "Create New Partition" is selected at "System Partition", do not
!
specify a value for the partition larger than the available disk area.
First Partition
Second
<Maintenance
Partition
Partition>
Deleted
Retained
Installing the Operating System and Utilities 4-9
Third
Forth
Partition
Partition
Retained
Retained
Advertisement
Table of Contents
