Table of Contents
Advertisement
Installing or Removing the Server into/from the Rack
This subsection provides the instructions necessary ton install the rack-mount server unit into a standard EIA 19-inch
rack cabinet.
This subsection also describes the removal procedure for the rack mount server unit from the 19-inch rack cabinet.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-8 for details.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
WARNING
Do not use any rack which does not conform to the relevant standard.
Disconnect the power cord(s) before installing or removing the server.
CAUTION
Do not pull out more than one device at a time from the rack.
Do not lift the server only by a single person.
Always install the server in the specified place.
Do not install the server without its cover in the rack.
Do not pinch your finger with mechanical components.
3-6
Advertisement
Table of Contents
