Removing the Bezel
Follow the procedure below to remove the bezel.
Pull the tab up.
1.
Slide the bezel to the right.
2.
Remove the bezel from the chassis.
3.
Removing the 5.25-inch Devices
Follow the procedure below to remove the 5.25-inch devices (standard CD-ROM drive and
optional devices).
Disconnect the interface and power cables from the device.
1.
Remove the two screws that hold the slide rails to the chassis and save them for future use.
2.
Only a single optional 5.25-inch device can be installed in the rack
NOTE:
mountable server.
Bezel
Setting Up Your System 2-11
Tab