C-2 Installing Windows 2000
Installation Assumption
The installation and configuration instructions in this appendix assume the following:
You have properly completed the hardware installation.
!
You have run the BIOS Setup Utility to check system configuration.
!
IMPORTANT:
system, PnP must be enabled in your system BIOS.
You will be installing Windows
!
CD-ROM media.
IMPORTANT:
preinstalled on your system, it was preconfigured at the factory.
Refer to your system's User's Guide and to the RAID
Installation Guide and the Disk Array Controller Installation
Guide and User's Manual for additional information on this
option card. If you need to change the RAID level from the
factory setting, you must change the setting before installing
the operating system.
To successfully install Windows 2000 on your
®
2000 Operating System from the
If you have the optional disk array controller