Table of Contents
Advertisement
Cloth
!
Do not wear a wool or synthetic cloth to work with the server.
Wear anti-static shoes to work with the server.
Take off any jewels (a ring, bracelet, or wrist watch) before working with the server.
Handling of components
!
Keep any component in an anti-static bag until you actually install it to the server.
Hold a component by its edge to avoid touching any terminals or parts.
To store or carry any component, place it in an anti-static bag.
PREPARING YOUR SYSTEM FOR UPGRADE
Follow the procedure below to prepare for installing or removing components.
Shut down the OS.
1.
Press the POWER switch to turn off the power of the server. (The POWER/SLEEP lamp
2.
goes off.)
Pull out the power cord from the AC inlet on the server.
3.
Used when optional power
unit is installed
Remove all cables connected to the server on the rear panel.
4.
Power cord shipped
with the server
Upgrading your Server 7-3
Advertisement
Table of Contents
