Table of Contents
Advertisement
C-6 Installing Windows 2000
Re-installing the Network Driver
After installing OS and deleting the network drivers, follow the procedure below if you want to
re-install the network drivers.
Restart OS and logon to your system.
1.
[Found New Hardware Wizard] dialog box appears.
2.
Click [Next].
Confirm that the [Search for a suitable driver for my device (recommended)] radio button
3.
is selected and click [Next].
Select the [Specify a location] check box and deselect other check boxes.
4.
Click [Next].
Another [Found New Hardware Wizard] dialog box opens.
5.
When using [Intel(R)82546EB Based Dual Port Network Connection], specify
[<CD-ROM drive letter>:\WINNT\W2K\PC62C\FD1].
When using [Intel(R)82546EB Based Dual Port Network Connection #2], specify
[CD-ROM drive letter>:\WINNT\W2K\PC62C\FD1].
Then click [OK].
Click [Next].
6.
Click [Finish].
7.
Another [Found New Hardware Wizard] dialog box appears.
8.
Refer to steps 2 to 7 to install.
After re-installing the network drivers, the link speed and duplex mode need to be
specified.
Refer to the section "Network Driver" in Chapter 4.
Advertisement
Table of Contents
