Hart Certification; Radio Approval; Additional Certification; External Standards And Guidelines - Endress+Hauser Proline Prosonic Flow P 500 Technical Information

Proline Prosonic Flow P 500

HART certification

Radio approval

Additional certification

External standards and
guidelines
Endress+Hauser
HART interface
The measuring device is certified and registered by the FieldComm Group. The measuring system
meets all the requirements of the following specifications:
• Certified according to HART 7
• The device can also be operated with certified devices of other manufacturers (interoperability)
The measuring device has radio approval.
For detailed information on the radio approval, see the Special Documentation →  87
Tests and certificates
• Ambient temperature –50 °C (–58 °F) (order code for "Test, certificate", option JN)
• EN10204-2.1 confirmation of compliance with the order and EN10204-2.2 test report
• EN 60529
Degrees of protection provided by enclosure (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use -
general requirements
• IEC/EN 61326-2-3
Emission in accordance with Class A requirements. Electromagnetic compatibility (EMC
requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment
• NAMUR NE 32
Data retention in the event of a power failure in field and control instruments with
microprocessors
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 105
Specifications for integrating fieldbus devices in engineering tools for field devices
• NAMUR NE 107
Self-monitoring and diagnosis of field devices
• NAMUR NE 131
Requirements for field devices for standard applications
• ETSI EN 300 328
Guidelines for 2.4 GHz radio components.
• EN 301489
Electromagnetic compatibility and radio spectrum matters (ERM).

Ordering information

Detailed ordering information is available as follows:
• In the Product Configurator on the Endress+Hauser website:
-> Select your country -> Click "Products" -> Select the product using the filters and search field ->
Open product page -> The "Configure" button to the right of the product image opens the Product
Configurator.
• From your Endress+Hauser Sales
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
Center:www.addresses.endress.com
www.endress.com -> Click "Corporate"
81