Installing Collocated Hssoe Odus; Ethernet Services Only; Ethernet And Tdm Services; Link Configuration And Hssoe - Radwin 2000+ SERIES User Manual

Installing Collocated HSSoE ODUs
11.3 Installing Collocated HSSoE ODUs
11.3.1 Ethernet Services Only
Use an IDU‐H/HP for the collocated ODUs instead of separate PoE devices.
11.3.2 Ethernet and TDM Services
For RADWIN 2000+ Series class ODUs: To attain Layer 2 connectivity for up to two such ODUs,
you should connect one of the two the IDU‐C (or IDU‐E) LAN ports to the IDU‐H/HP LAN ports.
You may use the second IDU‐C (or IDU‐E) LAN port to connect to a switch.
11.4 Link Configuration and HSSoE
11.4.1 Setup for Illustration
We will show how to set up our demonstration link as HSS master and HSS client in turn. (The
second collocated link is a similar unit, the setup details of which, need not concern us).
11.4.2 Configuring the RT‐A(HBS) as an HSS master

To configure the RT‐A(HBS) as an HSSoE Master:
1. Log on to the RT‐A(HBS).
2. Open the Configure | Hub Site Sync tab.
RADWIN 2000+ Series User Manual Release 4.2.40 11‐4