Configuring The Rt-A(Hbs) As An Hss Client - Radwin 2000+ SERIES User Manual

Configuring the RT‐A(HBS) as an HSS client
Notice additional HSS client at IP address 10.104.3.2: It is collocated to the forego‐
ing radios using an HSS unit connected to theHBS.
11.4.3 Configuring the RT‐A(HBS) as an HSS client
We switch HSS roles between our RT‐A(HBS) and the collocated ODU.

To configure the RT‐A(HBS) as an HSSoE Client:
1. Follow steps 1 to 4 for configuring the HSS master (see Configuring the RT‐A(HBS) as
an HSS master on page 11‐4).
2. At step 5 for HSS master, choose Hub Sync Client ‐ Continue Tx.
Here is the outcome:
RADWIN 2000+ Series User Manual Release 4.2.40 11‐9