Changing the Link Band
•
Such additional Bands must be available within the framework of your local regulations
The foregoing applies to both regulated and unregulated Bands.
To obtain and install additional bands:
1.
As Installer, open the window of Figure
lowing instruction panel is displayed:
Figure 6‐12: Add Bands Instructions Panel
The serial numbers displayed are those of the ODUs in the link. Click Copy to Clip‐
board.
2.
Now carry out steps 2 to 5 in Figure
contains a form like this:
RADWIN 2000+ Series User Manual
6‐10 above, and click Add Bands. The fol‐
6‐12. Step 2 will take you to a Web page, which
Release 4.2.40
6‐24