Manager Traps
8.5 Manager Traps
The RADWIN Manager application issues traps to indicate various events, displayed in the
Events Log.
Table 8‐3: RADWIN Manager Trap Messages
Trap Message
Cannot bind to trap service port. Port
162 already in use by ProcessName
(pid: ProcessId)
Device unreachable!
Connected to <site_name>
<site_name> Site will be reset.
Restore Factory Default Settings in
process on Site <site_name>
Factory Settings: The process was not
finished due to connection issues.
Reset: The process was not finished
due to connection issues.
Cannot Write to Monitor file. There is
not enough space on the disk.
Windows Error: <error_ID>. Cannot
Write to Monitor file.
Identical IP addresses at
<local_site_name> and
<remote_site_name>
The Product is not identified at the
<local_site_name> site.
The Product is not identified at the
<remote_site_name> site.
The Product is not identified at both
sites.
Product Not Identified!
RADWIN 2000+ Series User Manual
Severity
Remarks
Warning
RADWIN Manager will not catch any
traps from the ODU, some other
application has grabbed this port.
Error
Check connectivity to ODU
Information
Information
Information
Warning
Factory setting failed due to
connectivity problem to ODU
Warning
Factory setting failed due to
connectivity problem to target ‐ ODU
will not be reset
Warning
Free some space on disk on the
managing computer and retry
Warning
Operating System error on the
managing computer
Warning
Set up a different IP to each site
Warning
RADWIN Manager is incompatible
with the ODU software version
Warning
Warning
Warning
Release 4.2.40
8‐10