Bulk Software Backup
10.104.3.4,netman,admin,netwireless
A PtMP list will contain the HBS and registered HSUs.
The center button allows you to add a single site:
Figure 14‐3: Adding a single site for backup
Enter the IP address of the site, the Read‐Write Community (Default: netman) and
then click OK. The site will appear in the Software Upgrade list box.
Items from the list can be cleared by selecting them and then using the right but‐
ton.
The right button in Figure
3. You may choose the SNMP version but probably it should be best left at your log‐on
setting.
4. Click the Start Backup button. Progress bars indicate backup status.
The success or failure of the backup is displayed on completion:
Save configuration produces a text file in the format of the above example for backing up an
installed link.
RADWIN 2000+ Series User Manual
14‐3, may be ruse to remove one or more selected sites.
Release 4.2.40
14‐3