Mounting an ODU, GSU, or HSS
•
•
•
•
Mounting on a Pole
1. Connect the pole clamp to the radio holder with the 8x90 bolts, but do not tighten
the bolts all the way ‐ tighten them so that they are not closer than a distance
equal to the radius of the pole. You will then have one "unit" that you can take to
the location on the pole where you want to mount the ODU. (See Figure
Figure
4‐24 for mounting on a thin pole).
Figure 4‐10: Connect Pole Clamp to Radio
Holder
RADWIN 2000+ Series User Manual
Tighten all bolts with a torque of 15 N*m.
When mounting an ODU on a pole or wall, ensure that the unit is
oriented so that the cable connectors are at the bottom.
Do not mount an ODU horizontally
Ensure that there are no direct obstructions in front of an integrated
antenna ODU or interference from man‐made obstacles.
Release 4.2.40
4‐21 to
Figure 4‐11: Tighten bolts
4‐13