Table of Contents
Advertisement
Configuring GHSS with an Internal GPS Unit
5. Choose GPS from the Protocol pull‐down menu:
6. If your site does not warrant the need for a shift in the transmission phase (see
page
12‐9 for a description of transmission phase), select the Normal radio button,
and click OK or Apply, then close the Hub Site Sync dialog box.
7.
If your site does warrant the need for a shift in the transmission phase (see page 12‐
9 for a description of transmission phase), and the selected RT‐A(HBS) is the RT‐
A(HBS) whose transmission phase must be shifted, select the Shifted radio button,
and click OK or Apply, then close the Hub Site Sync dialog box.
If the Transmission Ratio is not *exactly* 50%, you will not be able to change the
Transmission Phase, and a warning instructing you to adjust it to 50% will appear
(For instructions on how to adjust the Transmission Ratio, see Transmission Ratio
on page 8‐27).
RADWIN 2000+ Series User Manual
Release 4.2.40
12‐12
Advertisement
Table of Contents
