Vlan Configuration Using The Radwin Manager; Management Traffic And Ethernet Service Separation; Table 15-2 Port Settings - E - Radwin 2000+ SERIES User Manual

VLAN Configuration Using the RADWIN Manager
Egress Direction
Table 15‐2: Port settings ‐ Egress direction
The port 'does nothing' with regard to VLANs ‐ outbound frames are left
Transparent
untouched.
Port configured to untag user VLAD tags for all frames.
Untag all
Filter
15.5 VLAN Configuration Using the RADWIN
Manager
Incorrect VLAN configuration may cause havoc on your network. The
facilities described below are offered as a service to enable you to get best
value from your RADWIN 2000+ Series links and are provided "as is".
Under no circumstances does RADWIN accept responsibility for network
system or financial damages arising from incorrect use of these VLAN
facilities.
15.5.1 Management Traffic and Ethernet Service Separation
You can define a VLAN ID for management traffic separation. You should configure the system
to prevent conflicts as detailed below.
When configured for the default operational mode, a "Provider port" will handle ingress
traffic as follows:
• Filters frames that are not tagged with the Provider VLAN ID
• Removes the Provider double tag
Therefore, if a port is configured for management traffic separation by VLAN and as 'Provider
port', then the received management frames must be double tagged as follows:
RADWIN 2000+ Series User Manual Release 4.2.40 15‐4