Configuring False Radar Mitigation - Radwin 2000+ SERIES User Manual

Configuring False Radar Mitigation
False Radar Mitigation has two components:
1. Reduction of false positive radar detection by reduction of the probability of detecting any
kind of false radars, while allowing the system to detect real radar signals.
2. Elimination of detection of specific false radar types by blocking detection of false radars
of a specific type. There are three types of radars:
• Fixed: False radars with fixed pulse width having fixed repetition frequency
• Variable: False radars with variable pulse width having variable repetition frequency
• Staggered: False radars with variable repetition frequency within a burst period
(Applies to 5.4 GHz ETSI only)
17.4 Configuring False Radar Mitigation
The configuration method for the Master ODU (ETSI and FCC/IC) is the same as for the Slave
ODU (ETSI only). We will demonstrate the Master ODU for a link using the 5.3 GHz FCC/IC
band:

To configure False Radar Mitigation:
1. Log on to the Master ODU as Installer.
2. Enter the Configuration window and open the Advanced tab.
RADWIN 2000+ Series User Manual Release 4.2.40 17‐2