Figure 13-1 Software Upgrade; Figure 13-2 Add / Remove Site - Radwin 2000+ SERIES User Manual

Upgrading an Installed Link
Figure 13‐1: Software Upgrade Utility ‐ Main window
The default sites shown in the Software Upgrade list panel belong to the currently
installed sector. The list may be empty if you are running the RADWIN Manager
"offline".
2. The Software upgrade list title bar has three buttons on the right hand side.
Figure 13‐2: Add / Remove site buttons
The left button opens up a Windows file dialog to locate a list of locations to
update. The list has the following format:
<IP address>,<Read‐Only community>,<Read‐Write community>
For example:
10.104.3.2,netman
10.104.3.4,netman
The list should include RT‐A(HBS)s and RT‐B(HSU)s able to accept the same upgrade.
Non‐upgradable items will result in an error message. Contact Customer Service
about upgrading them.
The center button allows you to add a single site:
RADWIN 2000+ Series User Manual Release 4.2.40 13‐2