Chapter 10: Serial Hub Site Synchronization; Scope Of This Chapter; Shss Hardware Installation; Connecting An Hss Unit - Radwin 2000+ SERIES User Manual

Chapter 10: Serial Hub Site
Synchronization
10.1 Scope of this Chapter
This chapter describes Serial hub site synchronization (SHSS), and how to implement it.
10.2 SHSS Hardware Installation
SHSS can be used with the RADWIN 2000 C+ or RADWIN 2000 D+ only.
10.2.1 Connecting an HSS Unit
The HSS Unit is a compact, weatherproof (IP67) connector box that is installed on the same
mast as the ODUs. All collocated units using SHSS connect to this box using a CAT‐5e cable. A
single HSS unit can support up to ten collocated ODUs.
The HSS unit is supplied with ten protective covers; any port not in use must be closed with a
protective cover.
RADWIN 2000+ Series User Manual Release 4.2.40 10‐1