Radwin 2000+ SERIES User Manual page 138

Management
Ethernet
Figure 7‐16: Setting Ethernet services
Aging Time
The RT‐A(HBS) works in Bridge Mode. In Bridge mode the ODU performs both learning and
aging, forwarding only relevant packets over the sector. The aging time of the ODU is by
default, 300 seconds.
Ethernet Ports Configuration
For the RADWIN 2000 A+, RADWIN 2000 C+, and RADWIN 2000 D+, the Port will appear as
LAN1. For the RADWIN 2000i, two ports will appear: LAN1 and LAN2 (SFP), relating to the
ports on front panel of the unit.
The Ethernet port mode is configurable for line speed (10/100/1000BaseT) and duplex mode
(half or full duplex).
Line speed 1000BaseT is only available if the ODU is connected to A GbE PoE device.
.
RADWIN 2000+ Series User Manual Release 4.2.40 7‐25