Gsu Commissioning And Installation - Radwin 2000+ SERIES User Manual

GSU Commissioning and Installation
• 1 x GSU
• 1 x GSU Mounting Kit
• 1 x GPS Antenna
• 1 x GPS Antenna Mounting Kit
• 1 x RF Cable, 1.5m
• RADWIN Manager supplied either on CD or by electronic means
12.3.3 GSU Commissioning and Installation
Preparing the GSU for Use
At the depot, log on to the unit using Local Connection or IP address 10.0.0.120 to change its
IP address from the default (10.0.0.120). The method is the same as is used for an HBS. In the
example screen captures below, we use 10.104.20.1 with Subnet Mask 255.255.0.0 and
Gateway 10.104.10.21.
GSU Installation
The GSU looks like a small form factor ODU. Mounting the GSU follows the standard pattern.
The GPS antenna is mounted outside on a wall or pole.
Configuring the GSU
To configure the GSU, you log on to it, exactly as in RADWIN Manager.
The GSU Main Window
Here is the main window for GSU configuration:
RADWIN 2000+ Series User Manual Release 4.2.40 12‐3