Some Working Tips; Logging On; Figure 21-1 Web Interface - Log On - Radwin 2000+ SERIES User Manual

Some Working Tips
21.7.3 Some Working Tips
You can:
» Log on to a radio unit on the default IP address of 10.0.0.120/8, set the Link ID and IP
address instead of using the RADWIN Manager as in RADWIN Manager. Unlike the
Local Connection method, you need to reset the radio unit to see the change in the
Web Interface.
» Change the operating Band for the link instead of using the RADWIN Manager. You
can revert it the same way or by a direct connection, logged on as Installer.
» Look at Recent Events for either site
You cannot:
» Change default Tx Power
» Configure Spatial Multiplexing/Diversity
» Manage other features such as GSU (when supported), VLAN, QoS
» Perform Software upgrade
Be very careful:
» Using this tool if your link is providing Customer Service which may not be interrupted
with sync‐losses
21.8 Logging on
To use the Web interface, simply point your browser to the IP address of the site to which you
are connected.
Figure 21‐1: Web interface ‐ Log on
RADWIN 2000+ Series User Manual Release 4.2.40 21‐3